CS-2280 Manual Precision Lathe – 22″ x 80″ – 10HP

$22,500.00

  • 10 HP Spindle Motor, 12-Speeds
  • Precision Spindle with 3 Point Support
  • 3.2” Spindle Through Hole
  • Hardened and ground spindle gears and shafts; hardened and ground bedways
  • Solid Full Length Casting Base; Full-length Safety Foot Brake
  • Spindle Jog Button Control
  • One-shot/Auto Lubrication for Apron, Carriage, and Bed Ways
  • Multi-position Adjustable Feed Position Stops
  • Dual Inch/Metric Calibrated Tailstock Quill

Description

  • Swing Over Bed
  • Swing Over Cross Slide
  • Swing Over Gap
  • Width of Bed
  • Distance Between Centers
  • Cross Slide Travel
  • Top Slide Travel
  • Spindle Speeds
  • Spindle Speed Range
  • Through Hole Diameter
  • Spindle Nose
  • Spindle Bore Taper
  • Thread – Inches Pitch
  • Thread – Metric Pitch
  • Longitudinal Feed
  • Cross Feed
  • Quill Travel
  • Quill Diameter
  • Quill Bore Taper
  • Main Motor
  • Coolant Pump Motor
  • Packing Dimension
  • ML-2060T

  • 20"
  • 14"
  • 27.5"
  • 12"
  • 57"
  • 12"
  • 4.75"
  • 12
  • 36-1800 RPM
  • 3.125"
  • D1-6
  • MT#7 - MT#4
  • 45 (2-72) TPI
  • 39 (0.2-14) mm
  • 0.0015"–0.04" in/rev
  • 0.00075"–0.02" in/rev
  • 5"
  • 2.3"
  • MT#4
  • 7.5 HP
  • 1/8 HP
  • 108" x 42" x 66"
  • CS-2280

  • 22"
  • 14.2"
  • 30.7"
  • 13.2”
  • 86.5"
  • 10.2"
  • 5"
  • 12
  • 25-1500 RPM
  • 3.2"
  • D1-8
  • MT#5
  • 45 (2-72) TPI
  • 39 (0.2-14) mm
  • 0.0014"–0.04" in/rev
  • 0.00075"–0.02" in/rev
  • 7"
  • 2.95"
  • MT#5
  • 10 HP
  • 1/8 HP
  • 138" x 39" x 61"
  • HW-26 Series

  • 26"
  • 17.3"
  • 35"
  • 15.75"
  • 80" (Opt. 120" / 160")
  • 14.75"
  • 8"
  • 12
  • 10-1000 RPM
  • 4.5"
  • D1-11
  • MT#7
  • 44 (2-56) TPI
  • 39 (0.5-14) mm
  • 0.002"–0.032" in/rev
  • 0.001"–0.0094"
  • 6.5"
  • 3.3"
  • MT#5
  • 15 HP
  • 1/8 HP
  • 137" / 186" / 219" x 41" x 52"

Standard Accessories

  • 3-jaw chuck (12″)
  • 4-position tool post
  • Thread chasing dial
  • Steady rest
  • Coolant system

Optional Accessories

  • DRO System 80”(2-axis, x=0.0001”/z=0.0005” res)
  • Aloris CA #4-SET (Tool Post and 6 holders)
  • Aloris DA #5-SET (Tool Post and 6 holders)
  • Royal spindle type live center (M.T. #5)
  • BTC 3-jaw chuck w/back plate (Zero-set, 12” D1-8)
  • 4-jaw independent Chuck (12” or 16″ D1-8)
  • Face plate (20” D1-8)
  • Taper turning attachment
  • Micrometer carriage stop

Reviews

There are no reviews yet.

Be the first to review “CS-2280 Manual Precision Lathe – 22″ x 80″ – 10HP”