HW-30120 Manual Precision Lathe – 30″ x 120″ – 20HP

$37,500.00

  • 20 HP Spindle Motor, 12-Speeds
  • 4.1” (6.1” Opt)Spindle Through Hole
  • Solid One Piece Full Length Casting Base and Bedways for Maximum Rigidity
  • Spindle Jog Button Control
  • One-shot Lubrication for Apron, Multi-position Adjustable Feed Position Stops
  • Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang; Heavy Duty Two Speed Tailstock
  • Dual Inch/Metric Dials (Optional)

Description

  • Swing Over Bed
  • Swing Over Cross Slide
  • Swing Over Gap
  • Width of Bed
  • Distance Between Centers
  • Cross Slide Travel
  • Top Slide Travel
  • Spindle Speeds
  • Spindle Speed Range
  • Through Hole Diameter
  • Spindle Nose
  • Spindle Bore Taper
  • Thread – Inches Pitch
  • Thread – Metric Pitch
  • Longitudinal Feed
  • Cross Feed
  • Quill Travel
  • Quill Diameter
  • Quill Bore Taper
  • Main Motor
  • Coolant Pump Motor
  • Packing Dimension
  • Net Weight
  • Gross Weight
  • HW-26 Series

  • 26"
  • 17.3"
  • 35"
  • 15.75"
  • 80" (Opt. 120" / 160")
  • 14.75"
  • 8"
  • 12
  • 10-1000 RPM
  • 4.5"
  • D1-11
  • MT#7
  • 44 (2-56) TPI
  • 39 (0.5-14) mm
  • 0.002"–0.032" in/rev
  • 0.001"–0.0094"
  • 6.5"
  • 3.3"
  • MT#5
  • 15 HP
  • 1/8 HP
  • 137" / 186" / 219" x 41" x 52"
  • 6570 / 8223 / 10890 lbs
  • 6900 / 8554 / 11332 lbs
  • HW-30 Series

  • 30"
  • 21.3"
  • 38.9"
  • 15.75"
  • 80" (Opt. 120" / 160")
  • 14.75"
  • 8"
  • 12
  • 10-1000 RPM
  • 4.5"
  • D1-11
  • MT#7
  • 44 (2-56) TPI
  • 39 (0.5-14) mm
  • 0.002"–0.032" in/rev
  • 0.001"–0.0094"
  • 6.5"
  • 3.3"
  • MT#5
  • 15 HP
  • 1/8 HP
  • 158" / 214" / 252" x 47" x 76"
  • 7010 / 8663 / 11330 lbs
  • 7340 / 8994 / 11772 lbs
  • HR-30 Series

  • 30.7"
  • 21.25"
  • 42.1"
  • 18"
  • 80" (Opt. 120" / 160" / 200")
  • 15.35"
  • 9.4"
  • 12
  • 14-1000 RPM
  • 4.1" (Opt. 6.1")
  • D1-11 or A1-11
  • MT#7 - MT#5
  • 36 (2-72) TPI
  • 65 (0.8-14) mm
  • 0.002"–0.0276" in/rev
  • 0.001"–0.00138"
  • 8.3"
  • 4.133"
  • MT#6
  • 20 HP
  • 1/8 HP
  • 151" / 198" / 231" / 270" x 69" x 73"
  • 8580 / 9900 / 11220 / 13860 lbs
  • 9130 / 10670 / 12320 / 15400 lbs

Standard Accessories

  • 3-jaw chuck (15″)
  • Steady rest
  • Follow rest
  • Thread chasing dial
  • 4-position tool post
  • 4-position carriage stop
  • Coolant system with full-length splash guard

Optional Accessories

  • Digital Readout System
  • Aloris DA #5-SET (Tool post and 6 holders)
  • Royal spindle type live center
  • BTC 3-jaw chuck with back plate (Zero-set, 15″ D1-11)
  • Adaptor plate and rear 12″ 3 jaw chuck for back of spindle
  • Face plate (20″ D1-11)
  • Taper turning attachment
  • Micrometer carriage stop

Reviews

There are no reviews yet.

Be the first to review “HW-30120 Manual Precision Lathe – 30″ x 120″ – 20HP”