KTM-3VKF CNC Knee Mill with MillPwr G2 Control – 10″ x 54″

$27,825.00$31,825.00

  • 3 HP spindle motor with AC-Frequency drive, digital RPM display, load meter, and automatic spindle direction reversal when switching between high and low speed gear ranges.   Can run on either single phase or 3 phase power
  • 10” x 50” (Opt. 10″ x 54″) hardened and ground table top
  • Table, saddle, and knee with hardened and ground dovetail ways
  • Precision ground leadscrews with backlash compensating double nut
  • Precision bored and ground milling head, with super precision ABEC-7 bearings
  • Meehanite castings, with built in coolant reservoir in machine base
  • Centralized one-shot lubrication, with metered check-valves
  • Easy conversational programming, DRO-mode allows for full manual operations with built-in 3 axis absolute encoder glass scales
  • Engraving feature and DXF file import capability, USB drive and 12.1” high resolution flat panel color LCD display
Clear

Description

  • Table Size
  • Table Travel (X-Axis)
  • Saddle Travel (Y-Axis)
  • Knee Travel (Z-Axis)
  • Quill Travel
  • Ram Travel
  • Spindle Motor
  • Spindle Speed
  • Spindle Taper
  • Quill Diameter
  • Quill Feed Rate
  • Drilling Capacity (Manual / Power)
  • Boring Capacity
  • Milling Capacity
  • Maximum Work Load (Center)
  • Spindle Nose to Table Surface
  • Spindle Center to Column
  • Net Weight
  • Gross Weight
  • Shipping Dimensions
  • Power Requirements
  • KTM-3VSF with MillPwr G2

  • 9" x 49" (Opt. 9" x 42")
  • 31" (Opt. 24" / 28")
  • 11"
  • 15"
  • 4" w/ MillPwr3 G2 CNC Control
  • 14.5"
  • 3 HP
  • AC Frequency Drive Head 60-550-4500 RPM
  • R-8
  • 3.375"
  • 0.0015" / 0.003" / 0.006" in/rev
  • 0.75" / 0.37" diameter
  • 6" diameter
  • 2.0 in³/min
  • 850 lbs
  • 3.25" - 18.25"
  • 5" - 19.5"
  • 2500 lbs
  • 2800 lbs
  • 72" x 72" (skid)
  • 220v, 3 phase, 60 Hz, 10 Amp (optional 440v power requires 5A) but can also accept 220v, 1-phase power (15A) without a phase converter, ideal for customers with only 1-phase power
  • KTM-3VKF with MillPwr G2

  • 10" x 50" (Opt. 10" x 54")
  • 32"
  • 14"
  • 15"
  • 4" w/ MillPwr3 G2 CNC Control
  • 22"
  • 3 HP
  • AC Frequency Drive Head 60-550-4500 RPM
  • R-8
  • 3.375"
  • 0.0015" / 0.003" / 0.006" in/rev
  • 0.75" / 0.37" diameter
  • 6" diameter
  • 2.0 in³/min
  • 850 lbs
  • 2.75" - 17.75"
  • 5" - 27"
  • 3100 lbs
  • 3300 lbs
  • 72" x 72" (skid)
  • 220v, 3 phase, 60 Hz, 10 Amp (optional 440v power requires 5A) but can also accept 220v, 1-phase power (15A) without a phase converter, ideal for customers with only 1-phase power
  • KTM-4VKF-E with MillPwr G2

  • 12" x 50"
  • 30"
  • 17"
  • 17.25"
  • 4" w/ MillPwr3 G2 CNC Control
  • 22"
  • 3 HP
  • AC Frequency Drive Head 60-550-4500 RPM
  • R-8
  • 3.375"
  • 0.0015" / 0.003" / 0.006" in/rev
  • 0.75" / 0.37" diameter
  • 6" diameter
  • 2.0 in³/min
  • 850 lbs
  • 2.75" - 17.75"
  • 5" - 27"
  • 3400 lbs
  • 3600 lbs
  • 72" x 72" (skid)
  • 220v, 3 phase, 60 Hz, 10 Amp (optional 440v power requires 5A) 110v dedicated for CNC control, 20 Amp

Optional Accessories

  • Knee (Z-Axis) Power Feed
  • Air Power Drawbar
  • Flood Coolant System
  • Chip Pan
  • Riser Block
  • Angle-Lock Vise
  • Rustlick Coolant

Additional information

Number of Axis

2-axis, 3-axis

Reviews

There are no reviews yet.

Be the first to review “KTM-3VKF CNC Knee Mill with MillPwr G2 Control – 10″ x 54″”